GZDSP REM 4-8XII-S
Owner´s manual
The remote control enables users to adjust the GZDSP 4-8X or XII from the driver´s or passenger´s seat.
In order to enable all features used with GZDSP 4-8X or XII it is necessary to update the MCU firmware
of the DSP unit to version 1.07 available from the web page. Detailed instructions on how to update the
unit are listed in the manual of the GZDSP 4-8X or XII.
Features
Connecting the remote control
It´s recommended to use the latest available software version for the GZDSP unit. Download the latest version from the web page.
Terms of Warranty
The limited warranty for this product is covered by GROUND ZERO´s regional distribution partners and their terms and conditions. For
further information contact your local retailer or distributor
Ground Zero GmbH
Erlenweg 25, 85658 Egmating, Germany
Tel. +49 (0)8095/873 830
www.ground-zero-audio.com
Operation of the
rotational and push button
(in standard mode)
In standard mode, rotating the knob counter wise or in opposite direction adjusts the main level
(0-66). Pushing the knob quickly enables the preset mode. Rotating the knob to the desired
preset followed by pushing the knob changes the preset accordingly. Long push of the knob
enables the subwoofer level mode indicated by the flashing display and VOL LED (0-40). Without
further action the standard mode recurs, automatically and the display fades out.
Information on preset mode
If the display shows 0 in preset mode, there are no presets saved, yet. Without further action the
standard mode recurs, automatically and the display fades out.
Rotational and push button
LCD display
