6
1. Presentation
The UPS is a line interactive uninterruptible power system (UPS). When utility
input is normal, the UPS would provide surge protection and energy to charge
the internal battery. If the utility input is abnormal, the UPS can supply AC
power to the loads immediately.
(1). Utilizes microprocessor based controls, it will minimizes the dependency on hardware.
Beside this, it maximizes system flexibility and optimizes the assurance of reliability.
(2). Automatic frequency selection to match with utility power.
(3). High-grade battery charger
to prolong battery’s life and fully charge the battery.
(4). With actual overload protection both in line and battery mode.
Front Panel
LCD type
“ON/OFF/TEST/SILENCE” button
No matter the UPS plugged
in or not. Press the “ON/OFF/TEST/SILENCE” button till the
beep stop to turn on or to turn off the UPS. When UPS is working under AC mode, it also
activates the UPS‘s self
-test by press the bottom less than 1 second.
In back up mode, press the bottom about
1 second to activate the UPS’s silence function.
“LINE mode” indicator (Green)
The indicator will illuminate when the utility input is normal.
“BACKUP mode” indicator (Yellow)
The indicator illuminates when the power is supplied from the battery.