background image

Need Help? www.GroutGroovy.com | 866-269-9404

SAFETY INSTRUCTIONS

•  Keep the power cord away from sharp objects.

•  Keep your hands and feet away from cleaning brush.

•  Always wear shoes that are not slippery so you do not 

fall on wet floor, and keep hands and feet away from the 

cleaning brush.

•  Never use replacement parts and accessories not provided 

or recommended by the manufacturer.

•  If the cord becomes damaged during use, disconnect the 

cord from the power supply immediately and discontinue 

use.

•  Remove the plug from the wall socket after using the 

machine, before servicing, or when the machine is not in 

use.

•  Do not immerse the machine in water or other liquid.

•  Do not use the machine if the guard is damaged or worn.

•  Make sure that the cleaning brush is properly secure to the 

machine in accordance with the instructions.

•  Do not use worn cleaning brushes.

•  Only use the machine in an upright position, with the 

cleaning brush pointing to the ground.

•  Do not use worn cleaning brushes.

•  Only use the machine in an upright position, with the 

cleaning brush pointing to the ground. 

Safety Instructions

3

 

Beware that after releasing the trigger the cleaning brush may 

continue to rotate for a short period.

WARNING!

 

When using the machine the safety rules contained in this manual 

must be followed. For your own safety and bystanders please read 

these instructions before operating the machine. 

WARNING!

Summary of Contents for VERTICAL GROUT CLEANING MACHINE









Reviews: