Need Help? www.GroutGroovy.com | 866-269-9404
6
When using Grout Groovy
TM
on tile floors other than porcelain
or ceramic, please be careful with expensive tile products like
marble, granite, slate, or wood-looking tile. Test in a small area
first and check for any scratching of tile surfaces prior to cleaning
tile grout.
NOTICE!
INSTALLING A NEW CLEANING BRUSH (fig. E)
• Unplug the machine from power source.
• Remove the old nylon cleaning brush by loosening the
spindle nut (2), using
the wrench (1), while
holding the spindle
(4) using the supplied
screwdriver (3).
• Insert the shaft of the
new brush onto the
spindle with the cut out
of the hub facing the
machine.
• When mounting the
brush wheel, use the
wrench (1) provided to
avoid damage to the machine.
• Tighten the spindle nut while holding the spindle using the
supplied screw driver (3). Don’t over tighten!
To purchase replacement nylon brushes or any Grout Groovy
TM
parts, or for general questions, please call toll free 866-269-
9404 or go to www.groutgroovy.com.
E
4
3
2
1