9
10
The inverter is thoroughly tested and inspected strictly before delivery. Our inverters leave
our factory in proper electrical and mechanical condition. Special packaging ensures safe
and careful transportation. However, transport damage may still occur. The shipping
company is responsible in such cases. Thoroughly inspect the inverter upon delivery.
Immediately notify the responsible shipping company if you discover any damage to the
packaging which indicates that the inverter may have been damaged or if you discover
any visible damage to the inverter. We will be glad to assist you, if required. When
transporting the inverter, the original or equivalent packaging should to be used, and the
maximum layers for original carton is four, as this ensures safe transport.
3.4 Transportation
3.5 Storage of Inverter
If you want to storage the inverter in your warehouse, you should choose an
appropriate location to store the inverter.
The unit must be stored in original package and desiccant must be left in the
package.
The storage temperature should be always between -25
℃
and +60
℃
. And the
storage relative humidity should be always between 0 and 95%.
If there are lots of inverters need to be stored, the maximum layers for original
carton is four.
After long term storage, local installer or service department of manufacturer
should perform a comprehensive test before installation
Information
After long term storage, the Real Time Clock of the inverter
maybe not correct, it will cause the Energy produced today
(E_day) error, you need to set the time and date, refer to 6.3.5
setting inverter time and date.
3.6 The advantage of inverter
The features of inverter are below:
Dual independent MPP trackers
Integrated DC disconnect switch
RS485/Wifi /RF/GPRS
Wide PV voltage range
：
160V~1000/1100V
The maximum efficiency is 98.3%
IP65 environmental protection
Easy to install
Symbol
Description
Explanation
Tap symbol
Indicates display operation (see Section 6).
Inverter state symbol
Green/constant
Red/constant
Red/flashing
Operation
Fault
Software update
3.2 Type label
The type labels provide a unique identification of the inverter (The
type of product, Device-specific characteristics, Certificates and
approvals). The type labels are on the right-hand side of the
enclosure.
The Certificate Number is just for SAA.
Symbol on the inverter
******
XXX
XXX
3.3 Size and weight
A(mm) B(mm) C(mm) D(mm) Weight(kg)
3000-6000 TL3-S
7000-110000 TL3-S
12000-150000 TL3-S
393
393
393
480
480
480
200
200
200
473
473
473
21.2
22
23.5
