15
16
5.3
Mounting the Inverter
5.3.1 Preparatory work
Ø
There must be sufficient clearance between the individual inverters to ensure that
the cooling air of the adjacent inverter is not taken in.
Ø
If necessary, increase the clearance spaces and make sure there is enough fresh
air supply to ensure sufficient cooling of the inverters.
Ø
The inverter can't install to solarization
，
drench
，
firn location. We suggest that
the inverters should be installed at the location with some cover or protection.
Ø
Please make sure the inverter is installed at the right place.The inverter can't
install close to trunk.
Information
Ø
General tools
1.Personal safety equipment such as gloves,helmet,goggles,ear
plugs,safety harness etc
2.Step ladders
3.Knife
Ø
Tools for mechanical installation
1.Equipment for transporting and lifting the inverter
2.Electric(hammer) drill
3.Hammer
4.Set of drill bits,wrenches,sockets and screw bits
5.Socket driver,screw driver
6.Tape measure
7.Level
8.Pencil or other marker
9.Fastening screws,plugs etc
In order to avoid electrical shock or other injury, inspect existing
electronic or plumbing installations before drilling holes.
There are two types of installation mode ,please choose the
corresponding installation instructions.
DANGER
NOTICE
