CAUTION
Ø
All operations regarding transport, installation and start-up,
including maintenance must be operated by qualified, trained
personnel and in compliance with all prevailing codes and
regulations.
Ø
Anytime the inverter has been disconnected from the power
network, use extreme caution as some components can retain
charge sufficient to create a shock hazard; to minimize
occurrence of such conditions, comply with all corresponding
safety symbols and markings present on the unit and in this
manual.
Ø
In special cases, there may still be interference for the specified
application area despite maintaining standardized emission
limit values (e.g. when sensitive equipment is located at the
setup location or when the setup location is near radio or
television receivers).In this case, the operator is obliged to take
proper action to rectify the situation.
Ø
Do not stay closer than 20 cm to the inverter for any length of
time.
3 Product description
3.1 MTLP-S Overview
DC Switch
PV Intput
RS485 Port
AC Output
G
A
B
C
D
E
F
Position
Description
LCD
LED
RS232 Port
Symbol on the inverter
Symbol
Description
Explanation
Indicates inverter operation status
Inverter status symbol
NORMALL
FAULT
3.2 Type label
The type labels provide a unique identification of the inverter (The type of product,
Device-specific characteristics, Certificates and approvals). The type labels are on
the right-hand side of the enclosure.
7
8
