11
12
A
Item
B
C
D
E
F
G
H
I
Name
inverter
Mounting frame
Safety-lock screws
Mounting screws
Mounting frame screws sleeve
Monitor software(disk)
Manual
Bluetooth
RS485 connectors
Quantity
1
1
4
6
1
2
1(Optional)
1(Optional)
6
Though the packaging box of Growatt is durable, please treat the
packing box gently and avoid dispose the packing box. In this
package, they are inverter ,cystosepiment and carton from inside
to outside.
NOTICE
DANGER
Risk of burns due to hot enclosure parts
Mount the inverter in such a way that it cannot be
touched inadvertently.
DANGER
All electrical installations shall be done in accordance with the
local and national electrical codes. Do not remove the casing. Inverter
contains no user serviceable parts. Refer servicing to qualified service
personnel. all wiring and electrical installation should be conducted by
a qualified service personnel .
Carefully remove the unit from its packaging and inspect for
external damage. If you find any imperfections, please contact your
local dealer.
Be sure that the inverters connect to the ground in order to protect
property and personal safety.
The inverter must only be operated with PV generator. Do not
connect any other source of energy to it.
Both AC and DC voltage sources are terminated inside the PV
Inverter. Please disconnect these circuits before servicing.
This unit is designed to feed power to the public power grid (utility)
only. Do not connect this unit to an AC source or generator. Connecting
Inverter to external devices could result in serious damage to your
equipment.
When a photovoltaic panel is exposed to light, it generates a DC
voltage. When connected to this equipment, a photovoltaic panel will
charge the DC link capacitors.
Energy stored in this equipment's DC link capacitors presents a risk
of electric shock. Even after the unit is disconnected from the grid and
photovoltaic panels, high voltages may still exist inside the PV-Inverter.
Do not remove the casing until at least 5 minutes after disconnecting all
power sources.
Although designed to meet all safety requirements, some parts and
surfaces of Inverter are still hot during operation. To reduce the risk of
injury, do not touch the heat sink at the back of the PV-Inverter or
nearby surfaces while Inverter is operating.
5.1 Safety
DANGER
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause
fires.
Do not install the inverter on easily flammable materials and
where flammable materials are stored.
Installation and Electrical Connection
5
Installation and Electrical Connection
5
