14
Operation
Display Panel
Solar pump inverter uses LCD operation panel. The operation panel is shown in the figure, including 3 LED lights,
LCD display and 5 keys.
Indicator and Key
Name
Function Introduction
POWER
System running
indicator
Green
LED on, inverter is running
ALARM
Warning
indicator
Yellow
LED on, warning or LED flashing in
auto operation mode
FAULT
Failure indicator Red
LED on, system failure
Operation /
Stop Key
1.Press for a short time, then the inverter starts
control;
2. Press for 2s, then inverter stops control.
Confirm /
Programming
Key
1.Press for a short time to enter programming
mode. After altering parameter, “press for a
short time” to confirm the alteration
2. Press for 2s to enter the programming menu.
Increment Key
1.When control parameter displays state,
increase parameter number or parameter value;
2. When operation displays data state, according
to operation mode, increase output frequency or
display current operation data.
Decrement Key
1.When control parameter displays state, press
for a short time to decrease parameter number
or parameter value.
2. When operation shows data state, according
to operation mode, decrease output frequency
or display current operation data.
Return Key
Return the initial display
Summary of Contents for 1500TL2-HV
Page 1: ...Solar Pump Inverter 750W 4000W Version 1 3 User Manual...
Page 8: ...6...
