21
4. Model Setting
Notice
: The set value of the parameter cannot be modified on the running state.if inverter is in
auto mode
，
but you need to set value of the parameter. First setting P00.01=0
，
manual operation
mode settings
，
press
for 2s, then inverter stops control. then you can set the P00~P15
group of function parameter.
After the manual setting is
completed,return to the
main page and press the 3s
shutdown key
for
shut down
Power off
Work mode
P00
Enter the main parameter
modification interface for long
press 2s for Enter key
Model set
P02.00
Turn up
to group P02
and click enter key
to
enter P02.00
Model set
0: Three phase motor
Model set
1:Single phase motor
Click enter
to enter, and
scroll
/
to select
motor type
Motor Par
Set OK
Click enter
to
set OK to return
When the three-phase motor is set to the single-
phase motor, the P02.05 needs to be changed to
the corresponding single-phase motor current.
Summary of Contents for 1500TL2-HV
Page 1: ...Solar Pump Inverter 750W 4000W Version 1 3 User Manual...
Page 8: ...6...
