30
31
Through RS485 interface-RS485-232 co PC
5.8.2. RS485 cable connection
There are two ways of RS485 connection (refer to chapter 4). Please refer to 5.8.2.1
with standard configuration1; and 5.8.2.2 with standard configuration2.
5.8.2.2. Type 1
1. Unscrew the plastic connector.
2. Make the RS485 cable go through the connector.
3. Put two heat shrink tubes onto the front head of RS485 cable.
4. Insert the two metal head into relevant small cupreous hole, and fasten the
connection by soldering.
5. Make the heat shrink tubes wrap the joint.
