6. Assemble the connector.
7. Connect the RS485 connector onto the inverter. Make sure the connection
matched ('1' to '1', '2' to '2').
5.8.2.2.Type 2
1
Please take out the RS485 waterproof device from the Accessories bag, even if
you Don't choose RS485 as communication method, the RS485 waterproof device
still has to be locked on the inverter.
.
2 Twist off the waterproof connector, and pull out one or two Stopper according to
your demand.
.
3 Make the cable through the hole of rubber stopper and the RS485 waterproof
cover. The type of cable is recommended as “KVVRP22/2*1.5”
.
32
33
