17
18
Notice the minimum clearances of the inverter. (Refer to Chapter3.2
and Fig.5.2
Required Clearances).
The wall selected to install the inverter must be strong and firm enough to support
and bear the weight of the inverter for a long period time. (Refer to Chapter 3.2)
The location selected must be suitable for inverters’ dimension. (Refer to 3.3
Dimensions and Fig.5.2 Required Clearances)
Do not install the inverter on structures constructed of flammable or thermo labile
materials.
Never install the inverter in environment of little or no air flow, nor dust
environment.
The Ingress Protection rate is IP65 which means the inverter can be installed
outdoors and indoors.
Do not subject the inverter to any direct sunlight.
The ambient temperature of the inverter should be -25
℃
~+60
℃.
The installation location must be freely and safely to get at all times.
Vertically installation and make sure the connection of inverter must be
downwards. Never install horizontal and avoids forward and sideways tilt.( Refer to
drawings below)
5.2 Selecting the Installation Location
Fig 5
.
2
Do not install the inverter near television antenna or any other antennas and
antenna cables.
Do not install the inverter in living area, the noise caused by the machine may
affect on daily life.
For security reasons, don’t install the inverter in place where the children can
reach.
5.3 Installation guide
5.3.1 Mounting the Bracket
In order to avoid electrical shock or other injury,
i n s p e c t e x i s t i n g e l e c t r o n i c o r p l u m b i n g
installations before drilling holes.
1)
2)
3)
4)
5)
6)
7)
8)
9)
This is guidance for installer to choose a suitable installation location, to avoid
potential damages to device and operators.
10)
11)
12)
13)
