19
20
To mount the inverter on the wall, we should mount the bracket to the wall firmly
first of all.
Bracket of Growatt TL3
Fig 5.3
Hint: Data units in mm
Steps:
Drill holes for screws while use the mounting frame as template.
Fix the mounting frame on the wall as the figures shown below, combine as the
screws as the Items Fig 4.1 shows (items D)
5.3.2 Mounting Inverter
Falling equipment can cause serious or even fatal
injury, never mount the inverter on the bracket
unless you are sure that the mounting frame is
really firmly mounted on the wall after carefully
checking.
After the bracket is firmly mounted on the wall, then mount the inverter on the
bracket.
Rise up the Growatt TL3 a little higher than the bracket. Considering the weight of
Growatt TL3, you need to hang on the inverter. During the process please maintain
the balance of the Growatt TL3. Please reference in Fig 5.5(a).
Hang the inverter on the bracket through the match hooks on bracket and the back
of the inverter.
Installed one M6*10 screw at each side of inverter to reliable fixed it on the wall.
Please reference in Fig 5.5(b).
Connection of a second protective conductor. Please reference in Fig5.6.
Recommend awning installation, the purpose is to extend the inverter service life and
reduce the power derating of the inverter. The dimension of the awning refer to
Fig5.8.
Fig 5.5
Fig 5.4
a)
b)
·
·
·
·
·
·
·
