3) Double knock the enclosure lid ready to input password. Single knock to change
value of first, double knock enter into next position.
2) Double knock, the text will show “input123
:
000".
4) Knock the enclosure lid three times to enter into setting interface.
5) Knock the enclosure lid four times to exit setting interface.
You can operate the settings as follow:
a) Setting language
1) Knock the enclosure lid once every time until the text line switch to the text as
follow:
You can operate the inputting “123”:
1) Single knock the enclosure lid until the text line switch to the text as follow:
2) Knock the enclosure lid twice and the text will show the language.
3) You can choose the language by tripping the enclosure once; the language
includes English, Deutsh, Espanol, Francais, Italiano.
4) Then you can trip the enclosure three times to confirm the language you have
chosen. And the text line change as follow:
The language is set!
b) Setting Com Address
For the communicating, the inverter needs a communication address. In
multi system, the addresses of inverters must be different from one to
another.
1) Single knock until the text line switch to the text as follow:
2) Double knock the enclosure lid and the lower number text”1” will flash: 001.
3) If you want to change it, single knock to change it from 0 to 9.
49
50
