4) If you want to set the address more lager, double knock the enclosure lid to let the
higher number text “002” flashing. And single knock the enclosure lid to change it
from 0 to 9. So as the highest number text. In the general condition, the maximum
number of the address is within 32.
5) Then you can knock the enclosure three times to confirm the address you have set.
And the text line change as follow:
The Com Address is set!
c) Switching the RS232 and the External wireless communication
The default type of communication is Rs232.
1) Trip the enclosure lid once every time until the text line switch to the text as follow:
2) Double knock the enclosure lid and switching to external wireless communication.
3) Then knock the enclosure three times to confirm it. And the text line change as follow
：
The External wireless communication is set!
d) Setting date and time
1) Single knock the enclosure lid until the text line switch to the text as follow
（
the
time maybe different depends on the inverte
r):
2) Double knock the enclosure lid and the text will switch to the year”2012”, and the
two lower numbers “2012” will flash, you can change it by single knock.
3) Double knock the enclosure lid and switching to the month”01”, and it will flash.
Then you can change it by single knock.
4) So as to setting the day and the time.
51
52
