Hint: Data units in mm
Steps:
Use the bracket as a drilling template and mark the positions where you need to
drill holes.
Drill three holes for screws, fasten the bracket against the wall with expansion
bolts.
Fix the mounting frame on the wall as the figures shown below, combine as the
screws as the Items Fig 4.1 shows (items C)
12) Do not install the inverter near television antenna or any other antennas
and antenna cables.
13) Do not install the inverter in living area, the noise caused by the
machine may affect on daily life.
14) For security reasons, don't install the inverter in place where the
children can reach.
5.3 Installation guide
5.3.1 Mounting the Bracket
DANGER
In order to avoid electrical shock or other injury, inspect existing
electronic or plumbing installations before drilling holes.
Bracket of Growatt 4000UE-6000UE
Fig5.3
15
16
11) Notice the minimum clearances of the inverter. (Refer to 3.3 Dimensions
and Fig.5.2 Required Clearances).
Fig5.1
Fig5.2
To mount the inverter on the wall, we should mount the bracket to the wall
firmly first of all.
