37
38
Power: 3385.1W
COM Address:012
Please note in order to prevent disoperation, system language won't be change in
second level menu “Set language”, but it will be only if user saves save the choice by
knock three times and LCD displays “Set OK!”
The inverter provides five languages: Italian, English, German, Spanish, and French.
The number on Set language interface is sequence number of these five languages,
the sequence number and its corresponding language are shown in Table 6.3.3.
Kinds
Ways
Communication module
Table6.3.3 sequence number of languages
Language
Sequence Number
Italian
0
English
1
German
2
Spanish
3
French
4
Setting inverter's COM address
When communicating with monitoring software or device, the software or device
may regard inverter's COM address as communication address (Also may use
inverter's serial number as communication address).The COM address could be
assigned. The second level menu “Set COM Addr” of setting is to set inverter's COM
address.
Setting COM address:
Input password->Setting language->Set COM addr-> is the current address of
inverter.”Double knock the enclosure lid ready to input COM addr. Single knock to
change COM Addr. Knock three times to save COM Addr. See Fig 6.3.6 for reference.
Knock four times to exit setting.
Fig 6.3.8 current COM Addr
Setting communication way
The inverter can support three kinds of communication: RS232, Extern Wireless, Inter
Wireless.
Communication ways:
RS232
RS232
RS232 interface
Exter Wireless
Zigbee
Zigbee module
utside
he
nverter
o
t
i
Wifi
Wifi module
utside
he
nverter
o
t
i
Bluetooth
Bluetooth module
utside
he
nverter
o
t
i
Inter Wireless
Zigbee
Zigbee module
he
nverter
inside t
i
Wifi
Wifi module
he
nverter
inside t
i
Bluetooth
Bluetooth module
he
nverter
inside t
i
The Extern Wireless have three ways of communication: Zigbee, Wifi, Bluetooth.
The Intern Wireless have three ways of communication: ZIgbee, wifi, Bluetooth
Input password->Setting language ->RS232-> is the current way of communication.
Double knock the way of communication will flicker. Single knock to change the way
.Knock three times to save communication way .If the communication way is Exter
Wireless or Inter Wireless, It will have three kinds of communication. It is a cycling
display .a single knock will display next way. Knock three times to save way.
Input password->Setting language >RS232. Knock three times to save RS232 .Knock
four times to exit the setting.
Input password->Setting language >intern Wireless->Zigbee->channel->is set the
channel of extern Zigbee. Double knock the enclosure lid ready to input the Channel.
Single knock to change value of first, double knock enter into next position. Knock
three times to save thechannel. Knock four times to exit the setting. Knock four
times to exit the setting.
Input password->Setting->Extern Wireless->Zigbee->channel->PIN->is set the PIN of
extern Zigbee. Double knock the enclosure lid ready to input the PIN. Single knock to
change value of first, double knock enter into next position. Knock three times to
save the PIN. Knock four times to exit the setting.
Input password->Setting->Extern Wireless->wifi. Knock three times to save RS232
.Knock four times to exit the setting.
Setting RS233
Setting Zigbee of extern wireless
Setting Wifi of extern wireless
