1) Trip the enclosure lid once every time until the text line switch to the text as
follow:
RS232
2 ) D o u b l e k n o c k t h e e n c l o s u re l i d a n d s w i t c h i n g t o e x t e r n a l w i re l e s s
communication.follow:
Exter wireless
3) Then knock the enclosure three times to confirm it. And the text line change as
follow
：
Setting...
Setting. OK
The External wireless communication is set!
d)Setting date and time
1) Single knock the enclosure lid until the text line switch to the text as follow
the
time maybe different depends on the inverter
（
）
:
2012/01/01
12:00
45
46
2)
Double knock the enclosure lid and the text will switch to the year”2012”, and
the two lower numbers “2012” will flash, you can change it by single knock.
2014/01/01
12:00
3)
Double knock the enclosure lid and switching to the month”01”, and it will
flash. Then you can change it by single knock.
2014/07/01
12:00
4) So as to setting the day and the time.
2014/07/06
13:00
5)
Then you need knock the enclosure three times to confirm it. And the text line
change as follow
：
Setting...
Setting. OK
The date and the time are set!
You can set all above by Growatt software 'Shinebus' with computer.
For further information please go to the site:
.
www.ginverte.com
Information
