14
13
4
Unpacking and inspection
The inverter is thoroughly tested and inspected strictly before delivery. Our
inverters leave our factory in proper electrical and mechanical condition. Special
packaging ensures safe and careful transportation. However, transport damage
may still occur. The shipping company is responsible in such cases. Thoroughly
inspect the inverter upon delivery. Immediately notify the responsible shipping
company if you discover any damage to the packaging which indicates that the
inverter may have been damaged or if you discover any visible damage to the
inverter. We will be glad to assist you, if required. When transporting the inverter,
the original or equivalent packaging should be used, and the maximum layers for
original carton is four, as this ensures safe transport.
After opening the package, please check the contents of the box. It should contain
the following, Please check all of the accessories carefully in the carton. If
anything missing, contact your dealer at once.
5
Installation
5.1 Safety instructions
Danger to life due to fire or explosion
Risk of burns due to hot enclosure parts
Mount the inverter in such a way that it cannot be touched
inadvertently.
5.2 Selecting the installation location
·
potential damages to device and operators.
·
The installation location must be suitable for the inverter's weight and
dimensions for a long period time.
·
Select the installation location so that the status display can be easily viewed.
·
Do not install the inverter on structures constructed of flammable or
thermolabile materials.
·
Never install the inverter in environment of little or no air flow, nor dust
environment. That may derate the efficiency of the cooling fan of the inverter.
·
The Ingress Protection rate is IP65 which means the inverter can be installed
outdoors and indoors.
·
The humidity of the installation location should be 100% without condensation.
·
The installation location must be freely and safely to get at all times.
·
Vertically installation and make sure the connection of inverter must be
downwards. Never install horizontal and avoids forward and sideways tilt.
This is guidance for installer to choose a suitable installation location, to avoid
Item
Name
Number
A
B
C
D
E
Inverter
Mounting frame
Safety-lock screws
Mounting screws
Mounting frame screws sleeve
1
1
4
6
6
F
Cable gland for AC connection
1
G
User manual
1
I
Explosion
bolts
4
H
Inverter
1
J
Paper board
1
F
Cable gland for AC connection
1
G
User manual
1
Item
Name
Number
Type2:
Type1:
H
I
J
A
B
D
E
C
F
G
Despite careful construction, electrical devices can
cause fires.
Do not install the inverter on easily flammable materials
and where flammable materials are stored.
