17
18
Please make sure the inverter is installed at the right place
。
The inverter
can't install close to trunk
。
·
that the cooling air of the adjacent inverter is not taken in.
·
If necessary, increase the clearance spaces and make sure there is enough
fresh air supply to ensure sufficient cooling of the inverters.
·
The inverter can't install to solarization
，
drench
，
firn location. We suggest that
the inverters should be installed at the location with some cover or protection.
。
There must be sufficient clearance between the individual inverters to ensure
5.3 Mounting the Inverter
5.3.1 Mounting the Inverter with bracket
Using the mounting frame as a template, drill 4 holes as illustrated in image.
DANGER
In order to avoid electrical shock or other injury, inspect
existing electronic or plumbing installations before drilling
holes.
Fix the mounting frame as the figure shows. Do not make the screws to be flush
to the wall. Instead, leave 2 to 4mm exposed.
There are two types of installation mode,please choose the
corresponding installation instructions.
NOTICE
Type1:
