19
20
Mark four points at the wall via the hole of the paper board
,
then remove the paper
board
.
or mounting frame
Knock explosion bolt into the
Ø
8 holes, screw the nuts to fix the bolt.
Type2:
5.3.2 Fixed the inverter on the wall
Falling equipment can cause serious or even fatal injury,
never mount the inverter on the bracket unless you are
sure that the mounting frame is really firmly mounted on
the wall after carefully checking.
WARNING
Rise up the inverter a little higher than the bracket. Considered the weight of
them.During the process please maintain the balance of the inverter.
Hang the inverter on the bracket through the match hooks on bracket.
After confirming the inverter is fixed reliably, fasten four M6 safety-lock sokets
head cap screws on the left and right side firmly to prevent the inverter from
being lifted off the bracket.
Hang
MTL-S onto the explosion bolt,then screw the four nuts with spanner to
fix MTL-S tightly.
Type1:
Type2:
