background image

The  Growatt  is  a  PV  Inverter  that  converts  DC  Current  from  PV  generator  into  AC 

current. The Growatt is suitable for mounting indoors and outdoors.

Notes on this manual

 

1.1 Validity

1.2 Target Group

1.3 Safety

You can use the AC current gernerated as follows:

Appropriate Usage

This manual describes the assembly, installation, commissioning and maintenance of 
the following Growatt Inverters:

       Growatt 3600 MTL 
       Growatt 4200 MTL
       Growatt 5000 MTL

This manual is for qualified personnel. Qualified personnel have received training 
and have demonstrated skills and knowledge in the construction and operation of 
this device. Qualified personnel are trained to deal with the dangers and hazards 
involved in installing electric devices.

    

  Contact

Display

    6.1  LCD display

    6.2  LCD control

    6.3 Setting the LCD display

Modes of Operation

  7.1 Normal mode

7.2 Fault mode

  7.3 Shutdown mode

  Inverter Status

  Communitions

 9.1  Communications software
         instructions

 9.2  Monitor

 Trouble Shooting

 System Fault

 Inverter Failure

 Specifications

Growatt Factory 
warranty

  Warranty conditions

6

7

8

9

10

11

12 

13

14 

15 

16

This  manual  does  not  cover  any  details  concerning  equipment  connected  to  the 
Growatt MTL ( e.g. PV modules). Information concerning the connected equipment 
is available from the manufacturer of the equipment.

Additional information

Find further information on special topics in the download area at www.ginverter.com

1

Summary of Contents for Growatt 3600 MTL



















Reviews: