29
30
Tips and Disclaimers
7.3.3.2 Language Setting
7.3.3.4 Set Date and Time
7.3.3.3 Set the COM Address
The grid voltage and frequency of the inverter are set according to NB/T 32004-2013 or
the latest domestic standard.
If the grid voltage is close to or higher than the domestic regulations, the inverter cannot
be connected to the grid and the local power operator can obtain the voltage level.
According to the voltage of the grid connection point, the user can select other voltage
levels.
Excessive voltage of the power grid may affect the normal use and
service life of the household appliances on the grid side, or cause loss
of power generation. Due to the related effects and consequences
caused by the integration of the output voltage automatic control
function, we do not recognize any responsibility
The default language is Chinese, press the touch twice to enter the setting mode, switch
the language with a single touch, and touch the setting twice to confirm the setting.
Set Language
English
English
Chinese
Set OK
The default COM address is 1, continuous touch twice to enter the setting mode, single
touch, 1, continuous touch twice to confirm the setting, long press 5S digital to
zero.
Set Comaddr
1
Set Comaddr
2
Set OK
Touch twice to enter the parameter setting submenu, select the general setting, press
twice to enter the general setting submenu, single touch to switch the display interface,
touch the date and time interface twice to enter the setting state, single touch,
1, press twice to confirm the setting, long press 5S digital to zero.
After the storage time exceeds one month, the time and date set by the
inverter may be incorrect. The inverter needs to be set before it is
connected to the grid.
Figure 7.8
Figure 7.9
Figure 7.10
Set Date
2018
-12-14
Set Time
12
:30:30
Set Date
2018-
12
-14
Set Date
2018-12-
14
Set Time
12:
30
:30
Set Time
12:30:
30
Set OK
Set OK
Set Comaddr
1
Set Language
English
General
Advanced
Set
Parameter
