39
40
8.2 Local Data Monitoring
8.2.1 Mobile phone app (Shinephone) Local Monitoring
8.2.1.1 Log on to app for local monitoring
8.2.1.2 Local Monitoring and Debugging Use
MAC series inverter local data monitoring can be realized by mobile phone APP, USB
connected U disk.
1>Method 1
When you open the app login front page ,click the local debugging tool, and you can get
the wifi name of the collector by scanning the QR code or barcode
（
The default
password for WIFI is 12345678. If you have already connected, you can click "Skip" to
connect directly to the WIFI.
）
2>Method 2
Open app enter user name and password click login, enter me (personal center). Click
the enter tool, find the local debugger to enter, and you can get the wifi name of the
collector by scanning the QR code or barcode
（
The default password for WIFI is
12345678. If you have already connected, you can click "Skip" to connect directly to the
WIFI.
）
Figure 8.14
Figure 8.15
When viewing local monitoring, you must keep the phone's wifi connected to the
collector's wifi to view local monitoring (to enter the local monitoring page, first click
auto refresh to get the latest data information. Electricity generation: the option to view
the latest generation, daily generation, monthly and annual generation of detailed
information; power: you can see the current power and rated power value; failure: can
read the equipment detailed fault information;
Note:
Please ask the professional to operate above.
1.device control
Note:I
n addition to resetting the password to connect to the network, other WiFi
modules that must connect to the collector can view information.
A.Reset password
Need network connection login oss account to set up or modify the local debug
password;
B.Setting configuration
The configuration data of inverter, voltage, power and so on can be modified according
to the usage.
