编号：
GR-UM-C -00
33
/
57
1. Add collector interface 2. Collector list interface 3. Add power station interface
Collector
：
1.
Add a collector to add multiple collectors under the specified power station name.
Way: click ―+‖on the top right corner to add datalogger
（
WiFi/GPRS etc
）
as 7.1.1-02(Note:
If add wifi datalogger will need to configure it manually, scan the wifi datalogger for 2 seconds until a window pops up,
then choose configure datalogger, APP will get the WIFI name , only need to input password and click set, around 30
seconds, the configuration will be done successfully.
