编号：
GR-UM-C -00
18
/
56
5.3
Moving Requirements
•The inverter is heavy, please move it with care and
keep balance to avoid personnel injury.
•Do not place the inverter with its wiring and signal
terminals at the bottom contacting with floor or any
other object because the terminals are not designed to
support the weight of inverter.
Plan 1：
1>As shown in Fig5.7, use a rope to tie at ring and handle, lift the inverter from
package and move to installation position.
2>When you are moving the inverter, please keep the balance.
Notice: There is front and bottom mark on the package.
Plan 2(Optional):
1> As shown in Fig5.8, 4-6 persons lift the inverter out of package swap the ring to
moving handles.
2>When you are moving the inverter, please keep the balance.
Notice: There will be front and bottom mark on the package.
Fig 5.7 Fig 5.8
