15
16
Ø
Please make sure the inverter is installed at the right place.The inverter can't install
close to trunk
.
5.3
Mounting the Inverter
5.3.1 Mounting the Inverter with bracket
5.3.2
Fixed the inverter on the wall
DANGER
In order to avoid electrical shock or other injury, inspect existing
electronic or plumbing installations before drilling holes.
Fix the mounting bracket as the figure shows. Do not make the screws to be flush to
the wall. Instead, leave 2 to 4mm exposed.
Falling equipment can cause serious or even fatal injury, never
mount the inverter on the bracket unless you are sure that the
mounting frame is really firmly mounted on the wall after carefully
checking.
Hang the inverter on the bracket through the match hooks on bracket.
Ø
After confirming the inverter is fixed reliably, fasten one M4 safety-lock screws on
the right or left side firmly to prevent the inverter from being lifted off the bracket.
Ø
Rise up the inverter a little higher than the bracket. Considered the weight of
them.During the process please maintain the balance of the inverter.
WARNING
