4
3
2.4 Safety Instructions
1
)
Please read this manual carefully before installation. If the equipment is not installed
according to the instructions in this manual, or if the equipment in the manual is
ignored, the company has the right to not guarantee the quality;
2
)
All operations and wiring, please operate by professional electrical or mechanical
engineers;
3
)
When installing, please do not move the other parts inside the chassis except the
terminal block;
4
)
All electrical installations must comply with local electrical safety standards;
5
)
If the machine requires maintenance, please contact the local designated system
installation and maintenance personnel;
6
)
The use of this machine for grid-connected power generation requires the permission
of the local power supply department;
7
)
When installing PV modules during the day, use opaque materials to cover the PV
modules. Otherwise, in the sunlight, the voltage at the component terminals is high,
which poses a personal danger.
Make sure that the input DC voltage does not exceed 550V under
any circumstances. Higher input voltages may permanently damage
the machine and cause other damage, in which case the company
does not warrant and assumes any responsibility.
During the operation of the machine, the surface temperature of
the outer casing is high. Please carefully touch the outer casing to
prevent burns.
Danger
Warning
2.4.1 Sign convention
Sign
Explanation
High voltage danger
Plammable and explosive
High temperature
Wait 5 minutes after power off to ensure the machine is fully
discharged
Safety ground
DC
AC
Read the manual carefully
2.3.2 Product features
The characteristics of the inverter are as follows:
Dual independent maximum power point tracking
Built-in DC switch
Compatible with RS485/Wifi / GPRS / 4G communication
200V-1000V input voltage range
Maximum efficiency up to 98.65%
OLED display
Touch button
Protection level IP65
Weighs only 23kg
Easy installation
