37
38
NO
Reset Factory
NO
Set OK
123
General
Country/Aera
VDE0126
the OLED, Single touch to switch display or make the number
+
1.Double touch to
confirm the setting, as described below:
7.3.4 Backup mode setting
When the
–XH series inverter is used with the Battery and the Backup Interface box,the
Grid is abnormal,the inverter can work in backup mode to provide energy to the off-grid
load.The maximum output power same as inverter rated power.In the Backup mode you
can set the output voltage(default is 230V) and output frequency(default is 50Hz).If the
Backup mode is disable,the inverter will turn off the output when the grid is absent.The
user can enable the Backup mode through OLED settings, Single touch to switch display
or make the number
+
1.Double touch to confirm the setting , as described below:
7.3.3 Reset factory
Single touch to switch display or make the number
+
1.Double touch to confirm the
setting.
7.3.5 Work mode setting
When the
–XH series inverter is used together with the Battery, the inverter has three
working modes, Grid priority,Battery priority and Load priority(default is Load priority
mode), Users can set the inverter to work in different modes in different time periods
through OLED,Single touch to switch display or make the 1.Double touch to
confirm the setting, as described below: (If you want to set more time periods,you can use
the Shinebus tool.)
Double touch
Double touch
Multiple single
touch
Single touch
Manual Offgrid
Double touch
Disable
Disable
Enable
Single touch
Double touch
Set OK
Single touch
Disable
Enable
Double touch
Set OK
Backup Setting
Double touch
Disable
Multiple
single touch
Country/Aera
VDE0126
Double touch
Disable
Enable
Double touch
Set OK
Single touch
Disable
Enable
Double touch
AC Volt
230V
240V 208V
Single
Double touch
Double touch
Double touch
AC Freq
50Hz
60Hz
touch
AC Freq
50Hz
60Hz
Set OK
touch
Double touch
Password
123
Double touch
AC Volt
230V
240V
208V
Single
touch
Double touch
General
Advanced
AC Volt
230V 240V
208V
Perform this operation with caution because all configured parameters
except the current date,time, and model parameters will be restored to their
factory defaults.
ExportLimit
ExportLimit
ExportLimit
Password
Advanced
Information
