8
The components in the inverter are live. Touching live
components can result in serious injury or death.
•
Do not open the inverter except the wire box by qualified
persons.
•
Electrical installation, repairs and conversions may only
be carried out by electrically qualified persons.
•
Do not touch damaged inverters.
Danger to life due to high voltages in the inverter.
•
There is residual voltage in the inverter. The inverter
takes 20 minutes to discharge.
•
Wait 20 minutes before you open the wire box.
Persons with limited physical or mental abilities may
only work with the Growatt inverter following proper
instruction and under constant supervision. Children are
forbidden to play with the Growatt inverter. Must keep the
Growatt inverter away from children.
Make all electrical connections (e.g. conductor termination, fuses, PE
connection, etc.) in accordance with prevailing regulations. When
working with the inverter powered on, adhere to all prevailing safety
regulations to minimize risk of accidents.
Systems with inverters typically require additional control (e.g.,
switches, disconnects) or protective devices (e.g., fusing circuit
breakers) depending upon the prevailing safety rules.
2.7.2 Electrical Connection Warnings
2.8 Operation Warnings
3.1 Inverter
Overview
3.2 Information of Label
Anytime the inverter has been disconnected from the power network,
use extreme caution as some components can retain charge sufficient to
create a shock hazard; to minimize occurrence of such conditions,
comply with all corresponding safety symbols and markings present on
the unit and in this manual.
Ensure all covers and doors are closed and secure during operation.
All operations regarding transport, installation and start-up, including
maintenance must be operated by qualified, trained personnel and in
compliance with all prevailing codes and regulations.
Although designed to meet all safety requirements, some parts and
surfaces of Inverter are still hot during operation. To reduce the risk of
injury, do not touch the heat sink at the back of the PV-Inverter or nearby
surfaces while Inverter is operating.
Incorrect sizing of the PV plant may result in voltages being present
which could destroy the inverter. The Shinephone will read the error
message 'PV-Over voltage'. Turn the rotary switch of the DC Disconnect
to the Off position immediately. Contact installer.
WARNING
DANGER
WARNING
(1)Host panel
(2)LED indicators
(
3)Wiring box cover
(
4)Battery wake-up button
(
5
)
Mounting bracket
(
6
)
Heat sink
(
7
)
DC switch
(
8
)
PV input port
(
9
)
Battery input port
(
10
)
Antenna port
(
11
)
Comm. port
(
12
)
Backup output port
(
13
)
AC output port
1
2
3
4
5
6
8
9 10
11
12
13
7
The labels provide technical information of the inverter.Youinverter. You can identify the
inverter by the label,itlabel; it is located on the enclosure of the
inverter.Differentinverter. Different type labels can be found on the MIN TL-XH US
models.
The type of product (Type/Model)
Device-specific characteristics
Specifications of the inverter
Requirements of cable & torque
AFCI certificates
Serial number
Warning
Product Description
3
Fig 3.1
7
