2.3.3 Operation Warnings
7
>
Ensure all connectors are sealed and secure during operation.
>
Although designed to meet all safety requirements, some parts and sur-
faces of inverter are still hot during operation. To reduce the risk of injury,
do not touch the heat sink at the back of the PV-inverter or nearby sur-
faces while inverter is operating.
>
Incorrect sizing of the PV panels may result in voltages being present
which could destroy the inverter. The inverter display
>
All operations regarding transport, installation and start-up, including
maintenance must be operated by qualified, trained personnel and in
compliance with all prevailing codes and regulations.
>
When the inverter is disconnected from the grid, please be careful be-
cause some components can retain enough charge to create a shock
hazard. In order to minimize the occurrence of this situation,observe all
corresponding safety symbols and marks in this manual.
>
Under special circumstances, the inverter may be subject to electromag-
netic interference from surrounding equipment. At this time, the user is
obliged to take correct measures to reduce the interference from sur-
rounding equipment to the inverter.
>
Do not stay close to the inverter less than 20cm at any time.
WARNING
CAUTION
Summary of Contents for MOD 10KTL3-XH
