9 OLED display and touch button
The OLED display can display the running status
of the inverter, as well as various parameters
9.1 Start the inverter
9.1.1 Touch control
9.1.2 Set Country/Area
Information
Country setting
>Before starts up the inverter,we need to select the right Country/Areajf
we don't select any Country/Area, the inverter will run under
AS/NZS4777.2 as default for Australia,or run under VDE0126-1-1 for
other region after 30s.
When inverter powered on, OLED will light automatically. Once the PV power is sufficient,
OLED displays "PV Inverter",Press the touch key once a second to scroll through the dif-
ferent Country, showing on the screen will constantly change.For example, if you want to
choose Germany, press the touch key until the OLED display shows "VDE0126" ,Long
press the touch key for 5 seconds, the OLED shows Country/Area setting is complete.
30
Mark
Describe
Explain
Touch mark
Single touch
Double touch
Triple touch
Long press for 5s
Switch the display interface or
the current number plus 1
Enter the setting state or
confirm
Return to the previous display
interface
The current data returns to the
default value
Singh touch
Multiple tingle
touch
Prest
Press
Press
Summary of Contents for MOD 10KTL3-XH
