Single touch to switch display or make the 1 .Double touch to confirm the
setting.
9.3.3
Backup mode setting (Off-grid models only)
When the -XH series inverter is used with the Battery and the Backup Interface box,the Grid is
abnormal,the inverter can work in backup mode to provide energy to the off-grid load.The max-
imum output power same as inverter rated power.ln the Backup mode you can set the output
voltage(default is 230V) and output frequency(default is 50Hz).lf the Backup mode is disa-
ble,the inverter will turn off the output when the grid is absent.The user can enable the Backup
mode through OLED settings. Single touch to switch display or make the 1 .Double
touch to confirm the setting , as described below:
9.3.4 Work mode setting
When the -XH series inverter is used together with the Battery, the inverter has three working
modes, Grid priority,Battery priority and Load priority(default is Load priority mode), Users
can set the inverter to work in different modes in different time periods through OLED,Single
touch to switch display or make the 1 .Double touch to confirm the setting, as de-
scribed below: (If you want to set more time periods,you can use the Shinebus tool.)
34
Doable touch
Double touch
Multiple tingle
touch
Doable touch
Single touch
Doable touch
Double loach
Single touch
Multiple
•ingle touch
Doable touch
Double touch
Double touch
Stage toaeh
Double touch
Single touch
Double touch
Double tmefa
Double lno eh
Double touch
Doable touch
Double touch
Double touch
Single
touch
Double touch
Double touch
Singe
Singe
touch
Summary of Contents for MOD 10KTL3-XH
