4.2
Shine WebBox Settings via Internal Sever
Shine WebBox settings include: system setting, date and time setting, data upload frequency
setting.
4.2.1 System Settings
4.2.1.1 Shine WebBox Information
In the "Parameter" interface, you can view the Shine WebBox device information, including the
Shine WebBox serial number, check code, device model, hardware version, and software version.
As shown in Figure 4-4:
Figure 4-4
4.2.1. 2 Set Network Address of Shine WebBox
Shine WebBox address settings include: IP address, subnet mask, gateway and DNS settings. As
shown in Figure 4-5 below, if the network IP address of the Shine WebBox is the same as the
three digits in front of the gateway, you only need to set the IP address to Shine WebBox, no
need to set the subnet mask, gateway or DNS.
Figure 4-5
1. Log in to the Shine WebBox internal server page via local access and click "Parameter" to get
into the parameter settings page.
2. Find “local_ip”, enter the fixed IP address your plan for the WebBox, the default
address is 192.168.1.230, and you can change it to 192.168.1.240, default value is as
