If WebBox is working in a local Network, and update monitoring data to a local
server database, then you need change the
"Server_ip" to the IP address of the local server
database.
4.2.1.4 Set Domain Url of Shine Server
"Parameter" page, in the "Server_url" part, you can modify the ShineServer domain url.
International user server domain url is: server.growatt.com
Chinese user server domain url is: server-cn.growatt.com
The default domain name is "server.growatt.com", as shown in Figure 4-9. If you visit the Shine
WebBox internal server and found the domain url not correct, please change to
"server.growatt.com" (International User). Then make sure Shine WebBox uploads data to the
Shine Server.
Figure 4-9
4.2.1.5 Set Inverter COM port Address Range
1.
"Parameter" interface, settings of inverter address range, " Address_start" and
"Address_end" is the range of inverter COM address, the default start from 1, and end with
32. As shown in Figure 4-10, the range of the start address can be modified, but the start
address must be less than the end address. All of the monitored device must be within the
range, otherwise the inverter beyond the range can’t be monitored.
2.
Click “save” button, wait the feedback of configuration has been carried out
successfully.
4.2.2 Set Polling Interval Time
1.
In "Parameter" page, the "Delay time (S)" is the polling interval time setting, in the
drop-down list, you can choose "1.5s, 2s, 2.5s, 3s,", the default is 2S no need to change, as
shown in Figure 4-11.
