7.3
Reset the Shine WebBox
Before rest the Shine WebBox, please login Shine WebBox internal server, and in bottom of
“Parameter” page:
1.
Select “Enable_Reset” as below picture.
Figure 7-1
2.
Click on “save”, then Shine WebBox would restore factory settings after restarts.
Note: After reset to factory setting, you can login WebBox internal server with the
default IP address, refer to 3.4 Network Connection.
7.4
Clearing up the Record
1.
In bottom of “parameter” page, select “Enable_Clear_record”.
Figure 7-1
2.
Click on “save”, all the devices information records would be wiped out after the
Shine WebBox restarts.
