6
5
F
RS 485 communication interface of Lithium battery
G
CAN communication interface of Lithium battery
H
METER input terminal
I
NTC:Lead-acid temperature sensor terminal
J
CT 2( CT terminal use for measure other inverter power)
K
RJ 45 interface of DRMs(used only in Australia)
L
CT 1( CT terminal use for measure grid power)
M
ANTENNA
N
USB interface
O
RS 232 interface
P
EPS output(off grid connection)
Q
Ground Point
R
AC Grid (on grid connection)
3.4 Dimensions
3.5 Nameplate
3.6 Storage
Dimensions
A(mm)
B(mm)
C(mm)
D(mm)
Weight(kg)
SPA Series
474
428
178
590
17
Nameplate contains the following information. Take SPA3000 as an example:
Table 3.1
Table 3.2
Fig 3.2
Fig 3.3
•
place.
•The stored temperature range is -25 ° C - +60 ° C, storage humidity range is 0 ~ 95%.
•If a large number of SPA Series need to be stored, do not exceed seven layers.
•Long-term SPA Series need to be tested before installation.
The SPA Series is best stored in the original packaging and placed in a ventilated and dry
After the storage time exceeds one month, the time and date of
the factory setting of the SPA Series may be incorrect. Before the
SPA Series is connected to the grid, the related settings need to
be made. For the specific setting method, please refer to 6.4.3 to
set the time and date of the SPA Series.
