7
8
4
Unpacking
Installation
5
Please check whether external damage to the goods before unpacking. After unpacking,
Please check whether the unit damage or missing parts, If it is happen, Please contact
with supplier.
SPA series and accessories as follows:
Item
Number
Description
A
1
SPA Series(we describe this series as “SPA” as below )
B
1
User Manual
C
1
Paper board(installation guide)
D
1
Waterproof cover
E
1
Online Grid Connector
F
1
Offline Grid Connector
G
1
Communication cable
H
2
Current Sensor from grid to load and from grid to inverter
I
1
Lead-acid battery temperature sensor
J
1
RJ 45 connector
K
4
M6 setscrew
L
2
Battery power terminal
M
6
Screw
N
1
Hex screwdriver
Fig 4.1
Table 4.1
5.1 Basic installation requirements
•
•The installation location must match the size of the SPA series.
•Do not install the inverter on a building constructed of flammable or non-heat resistant
materials.
•SPA series's degree of protection is IP65 and can be installed indoors or outdoors. Please
refer to the below:
The installation location must be suitable for SPA series's weight for a long period time.
•
between SPA series and battery should not be more than 1.5m.
•In order to prevent the SPA from reducing the output power due to overheating, please
do not expose the SPA to direct sunlight.
•The ambient temperature should be -25
℃
~
60
℃
.
•The humidity of the installation environment should be between 0~95%.
•SPA series can be mounted on a plane that is tilted vertically or backwards. Please refer
to the below:
Battery installation option is not far away from the position of SPA series, the length
Fig 5.1
Fig 5.2
•
to provide adequate space for SPA series, Please refer to below:
In order to ensure machine can run normally and easy to operate, please pay attention
Fig 5.3
