Chart 6.9
Note:
1.
“Power Rate” is used to set up power of battery. So different battery may have the different power,
customer need to check the max power of battery.
2.
Time setting is 24-hour.If the end time is less than beginning time, it defaults to spanning days.
4.
Under the MODE Change, you can see the setup options below after pressing Enter:
MODE Change
WorkMode
Sensor
WorkMode
Cable CT
WorkMode
Meter
SP-CT
Battery Type
WorkMode
Lithium
WorkMode
Lead-acid
Press
“
enter
”
key to
make sure
Press
“
down
”
key
to the next item
Press
“
enter
”
key
to make sure
Chart 6.10
The MODE change has two options what are sensor and battery type, sensor is cable CT (default), meter and
SP-CT(wireless RF transfer). In the battery type, you can choose lithium battery or lead-acid battery.
5.
Under the ExportLimit, you can see the setup options below after pressing Enter:
