GROWSPAN™ CANOPY-TOP COLD FRAME
4
Revision date: 02.08.18
REQUIRED TOOLS
The following list identifies the main tools needed for
assembly. Additional tools and supports may be needed
depending on shelter, location, and application.
• Tape measure or measuring device
• Wrench or pliers
• Hammer and gloves
• Duct tape: optional (supplied by customer)
• Scissors or utility knife
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the shelter.
1. Unpack contents of shipment and place where you can
easily inventory the parts. Refer to the Bill of Materials/
Spec Sheets.
2. Verify all parts listed on Bill of Materials/Spec Sheets
are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide and all
shelter diagrams for clarification, or contact Customer
Service.
NOTE:
At this time, you do not need to open the plastic
bags containing smaller parts such as fasteners or
washers.
QUICK START GUIDE
For an overview of this shelter and to see the main
connection details, consult the diagrams in the Quick Start
Guide located at the back of these instructions.
Space below is reserved for customer notes.
