12
106205_06_07_08
Revision date: 08.30.18
Rafter shown differs in design.
1st Interior Rafter
End Rafter
Assemble Frame
2. Slide a band clamp (QH1402) onto each leg of first end rafter. Tape in place if needed. Set rafter on ground posts and secure to posts using 5/16" x 2 1/2"
(FAG336B) bolts and nuts (FALB02B).
Secure to top hole in ground post.
Use rope, cable, strap, or braces to stabilize rafter.
FRAME ASSEMBLY — CONTINUED
Inside of
Shelter
Outside of
Shelter
Rafter
Ground
Post
Band
Clamp
Front
Back
3. Slide a band clamp onto legs of first interior rafter, lift, and set rafter on next set of
ground posts. Secure as described above. Actual frame may differ.
NOTE:
Customer-supplied baseboards are shown
in some diagrams throughout these instructions.
BASEBOARDS:
If used, recommended
dimensions: 2" x 6" or wider. Length determined by
building.
Install baseboards after all polycarbonate
panels are installed. See Guide #2.
