10
Revision date: 12.30.16
Rafter Assembly
RAFTER ASSEMBLY
After setting the ground posts, continue with the rafter assembly. Do not set assembled rafters into position on the
ground posts until concrete has set. Check with contractor for set times.
NOTE:
All rafter assemblies consist of three main rafter sections. Consult the rafter diagrams in the Quick Start section
of these instructions before and during the rafter assembly process for details. Assistance is required to assemble the
rafters and frame. Assemble all main sections of rafters as described below and set aside.
STEP 1:
Select
the rafter pipes
to assemble one
rafter.
STEP 3:
Secure
each rafter joint
using two (2) Tek
screws.
STEP 2:
Slide
the separate pipe
pieces together.
STEP 4:
Wrap
each splice and
Tek screws with
duct tape to pro-
tect the cover.
PG500TC23G16S03
PG500TC2316S301
PG500TC2316S302
PG500TC23G16S03
30' Wide Rafter