24
Revision date: 12.30.16
2. Along the edge, clamp self-locking, duck-billed pliers to the cover material and
tie ropes or straps to the pliers.
NOTE:
The ropes or straps must reach over the top of the building to the
other side. The number of ropes depends on building length; use additional
ropes spaced even throughout the length to prevent tearing the main cover
when it is pulled into place.
IMPORTANT:
To prevent damage to the main cover during installation, use additional personnel and lifts as
needed.
4. Center cover side-to-side and end-to-end. Some covers include additional material for the width due to standard
material dimensions. This material can be removed and recycled, or it can be used by the customer.
Clamp self-locking,
duck-billed pliers along
the cover edge, tie
ropes or straps to the
pliers, and then pull
cover over the frame.
3. After tying ropes to the main cover, throw ropes over the building and pull cover into place.
Typical Film (or 5.2 oz) Cover Installation
