3
GROWSPAN
™
ROUND PRO GREENHOUSES AND SYSTEMS
Revision date: 01.23.19
POLYCARBONATE PANELS
Do not allow panels to remain in direct sunlight with
protective film in place. Doing so will cause protective
film to become difficult if not impossible to remove before
installation.
Store panels indoors or cover with a light-colored
tarp until you are ready to install.
ASSEMBLY PROCEDURE
Following instructions as presented will help ensure proper
assembly of your greenhouse. Failing to follow these steps
may result in an improperly assembled and anchored
greenhouse and will void all warranty and protection the
owner is entitled to.
Steps outlining assembly are as follows:
1. Verify all parts are included in shipment. Notify
Customer Service for questions or concerns.
2. Read these instructions, the Must Read document, and
all additional documentation included with shipment
before
you begin.
3. Gather tools, bracing, ladders (and lifts), and assistants
needed to assemble greenhouse.
4. Check weather
before
installing roof cladding. Do not
install cladding on a windy or stormy day.
5. Re-evaluate location and site based on information and
precautions presented in documentation included.
6. Prepare site.
7. Assemble frame components in the order presented.
8. Assemble frame including struts (if equipped).
9. Consult MUST READ document and properly anchor
frame.
10. Install end wall frame.
11. Install end wall cladding and door.
12. Install roof cladding.
13. Read the care and maintenance information in next
column.
14. Complete and return all warranty documents as
instructed.
SHELTER CARE AND MAINTENANCE
Proper care and maintenance of the shelter is important.
Check these items periodically to properly maintain shelter:
• Regularly check all polycarbonate panels to see these
are secure and in good condition. Replace damaged
panels immediately.
• Check connections and all fasteners to verify these
remain tight.
• Do not climb or stand on greenhouse at anytime.
• Inspect anchoring system to verify all components
remain tight and in good condition.
• Remove debris and objects that accumulate on
greenhouse. Use tools that will not damage panels or
film cover when removing debris.
• Remove snow to prevent excess accumulation. Use
tools that will not damage polycarbonate panels when
removing snow.
• Check contents of shelter to verify that nothing is
touching panels or film that could cause damage.
• If greenhouse is disassembled and moved, inspect all
parts and connections before reassembly.
• Depending on contents, construction of shelter,
shelter materials, and shelter location, the potential
for condensation exists. GrowSpan™ offers several
items that can be used to help alleviate a condensation
condition.
Please contact a GrowSpan™ representative for
additional information.
• For replacement or missing parts, call 1-800-245-9881
for assistance.
QUICK START GUIDE
For a quick overview of the building and its components,
consult the information and diagrams in the Quick Start
section near the back of these instructions.
