Mini-X Installation, Setup & User Manual GRT Avionics
Revision A9 61
7.2.2 To Enter a Direct-To Waypoint:
1. Press FLIGHT PLAN softkey to bring up the Flight Plan Entry Page.
2. Press the Mode softkey. A page appears with columns of letters and numbers, shown
below.
3. Enter the identifier of the waypoint you want to go to. To do this, press the softkey under the
first letter in the waypoint until that letter is highlighted and appears in the waypoint ID field
on top of the screen.
4. Press the knob (with NEXT highlighted) to advance the cursor. (HINT: If the next letter or
number is in a different column, you can simply press the softkey under the next character’s
column to automatically advance the cursor.)
5. After the waypoint identifier is entered, turn the knob to highlight ENTER, then press the knob.
6. The Active Direct-To flight plan page appears. Verify that the waypoint shown is correct, then
press EXIT.
7. Follow the GPS CDI indicator to the waypoint.
Knob Functions:
�
CANCEL- Cancel waypoint entry and go back to previous screen.
�
CLR- Go back one character to re-enter.
�
NEXT- Advance cursor to next character.
�
ENTER- Enter the waypoint into the flight plan and go to Active Flight Plan page.
�
REM K or ADD K- Shortcut to add/remove the K to an airport or NAVAID identifier.