GENO
®
-flushing compressor 1988 K
Order no. 015 151 963-inter Created: KONS-gmei-mrie G:\BA-151963-INTER_GENO-SPUELKOMP-1988_K.DOC
17
Compressed air
To use as a compressed air supply, the flushing compressor must be
fitted with a standard compressed air connection with quick coupling.
With this function, no air or dosing agent is added to the water.
Water/air mix
For the flushing of pipes with a water/air mix.
The flushing compressor is flushed through with water from an on-site
source. Volume-controlled addition of compressed air in periodic pulses
in order to increase the flushing efficiency. The flushing air pressure
automatically adjusts to a value which exceeds the existing water
pressure. The water flow is indicated in the LED display in m³/h.
If the disinfectant GENO
®
-Baktox (chlorine dioxide) is to be used, the
separate, independent dosing system MOBIdos (without flushing
compressor) is used.
Continuous air blast
In order to increase the efficiency of cleaning, this function can be
connected to the water/air mix, e.g., with sanitation flushing.
Disinfection
For system disinfection (disinfection of a drinking water installation) with
GENO
®
-Chlor A or GENO
®
-perox using the optional dosing system
GENODOS
®
DM-SK (see note below).
The GENO
®
-flushing compressor 1988 K is flushed through with water
from an on-site source. Volume-controlled supply of disinfectant to the
dosing connection on the flushing compressor. The dosing pump is
controlled by the controller of the flushing compressor and the dosing
pulses are indicated on the LED display (for dosing systems and
disinfectants, please refer to Accessories).
Note:
For system disinfection we recommend the independent and
mobile dosing system MOBIdos (order no. 160 150) which comes
complete with a system divider and is suitable for all three disinfectants
listed in the DVGW work sheet W 577; GENO
®
-perox (hydrogen
peroxide) GENO+-Baktox (chlorine dioxide) and GENO
®
-Chlor A (sodium
hypochlorite or chlorine).
