GENO
®
-flushing compressor 1988 K
Order no. 015 151 963-inter Created: KONS-gmei-mrie G:\BA-151963-INTER_GENO-SPUELKOMP-1988_K.DOC
22
Connection fitting cases ¾", 1", 1¼", 1½", 2"
For integration of the flushing compressor in the pipelines, e.g., in place
of an existing filter, adjusting piece, softening system, dosing system
Consisting of:
Connection fittings to be fitted, for example, in place of an adjusting
piece,
for ¾" 1", 1¼", 1½", 2" (variable installation length, as of approx.
175 mm),
2 adapters with seals for each nominal width.
Connection fittings for installation at the location of a filter with an
installation length of 100 mm, one flushing adapter ¾“, 1“, 1 ¼“
each (fixed installation length, 100 mm).
Boxer K fine filter with connection set
for assembly of the fine filter on the flushing compressor inlet.
Connection set for system divider
for assembly of an optional system divider DN25/32 on the flushing
compressor inlet.
2 connection brackets with spare O-rings.
Mounting instructions.
Complete in 130 mm Sortimo case, suitable for
Sortimo vehicle equipment.
151 070
Connection fitting cases 1½", 2", DN 65, DN 80
for parallel connection of two or, with DN 80, up to three flushing
compressors in piping, e.g., in place of an existing filter, adjusting piece,
softener, dosing system. Consisting of:
Connection fittings for 1 ½", 2", DN 65, DN 80
(variable installation length, as of approx. 190 mm)
2 adapters or reducing flange with seals for each nominal width.
2 blind caps.
6 connection brackets with spare O-rings.
Mounting instructions.
Complete in 130 mm Sortimo case, suitable for
Sortimo vehicle equipment.
151 080
