GENO
®
-flushing compressor 1988 K
Order no. 015 151 963-inter Created: KONS-gmei-mrie G:\BA-151963-INTER_GENO-SPUELKOMP-1988_K.DOC
39
Fig. 13: Toilet tank (disassembled angle
valve) with closing plug and flushing
fitting
Fig. D-14: Toilet tank – flushing without
angle valve disassembly as stipulated by
manufacturer
4 | Preparation of the drinking water installation for rinsing
Proper planning of the flushing process pays off during implementation.
We therefore recommend assessing the installation and checking the
installation plans to ensure they are up-to-date before flushing.
Particularly with sanitation flushing, any new angle valves and spare
parts for the fittings which may be required can be kept in reserve and
the customer can be informed of their necessity in advance.
1.
Sensitive fittings (e.g., WC flushing fittings, thermostatic mixers) are
to be disassembled or avoided in order to prevent flushing in
contamination.
2.
Surface-mounted fittings should be disassembled prior to flushing.
3.
In the case of flush-mounted fittings, suitable flushing fittings and
special flushing connections from the manufacturer can be used for
flushing. With fittings which cannot be disassembled or avoided, the
fine filters are to be either removed or the instructions provided by
the fitting manufacturer are to be followed.
