English (GB)
7
English (GB) Installation and operating instructions
CONTENTS
Page
Symbols used in this document
Applications
CIM 1XX LON module
Installation
Connecting the LON
Registration in a LON network
LEDs
Fault finding
Technical data
Service
Service documentation
Disposal
1. Symbols used in this document
2. Applications
The CIM 1XX LON module (CIM = Communication
Interface Module) enables data transmission
between a LON network and a Grundfos product.
The CIM 1XX is fitted in the product to be
communicated with or in a CIU 1XX unit (CIU =
Communication Interface Unit).
Retrofitting of the CIM 1XX is described in the
installation and operating instructions of the
Grundfos product.
Further information
For further information about configuration and
functionality of the CIM 1XX, see the specific
functional profile on the CD-ROM supplied with the
product.
2.1 CIM 1XX LON module
Fig. 1
CIM 1XX LON module
3. Installation
Warning
Prior to installation, read these
installation and operating instructions.
Installation and operation must comply
with local regulations and accepted
codes of good practice.
Warning
If these safety instructions are not
observed, it may result in personal
injury!
Caution
If these safety instructions are not
observed, it may result in malfunction
or damage to the equipment!
Note
Notes or instructions that make the job
easier and ensure safe operation.
T
M
04
19
56
15
08
Pos.
Designation
Description
1
A
LON terminal A
2
B
LON terminal B
3
Screen
LON terminal for cable
screen
4
LED1
Yellow service LED
5
Pin
Service pin (push-button)
6
LED2
Red/green status LED for
internal communication
between the CIM 1XX and
the Grundfos product
Warning
The CIM 1XX must only be connected to
SELV or SELV-E circuits.
1 2 3
4
6
5
